haier DW-7777-01 - Manual (Page 18)

English
6. Stand dishwasher upright.
7. The dishwasher must be secured to the
cabinet. There are two brackets on top of
the dishwasher that usually can be attached
to the countertop. If this is not possible, the
brackets “M” may be moved to the sides of
the dishwasher.
If you are going to attach the dishwasher to
the countertop, skip to step 13.
If you are going to attach the dishwasher
to the sides of the cabinet, follow steps 8
through 12.
8. To remove the brackets from the top, flatten
tab “n” at back of brackets with pliers and
pull the brackets out of the slots “O”.
9. break off the end of the bracket along the
scored line “P”.
10. Open dishwasher door and place towel
“Q” over pump assembly and spray arm
of dishwasher. This will prevent screws
from falling into pump area when securing
dishwasher to countertop.
11. Open dishwasher door and push the plastic
buttons “R” out of the side of the tub.
NoTE: Save the buttons to cover the holes
after dishwasher is installed.
12. Push bracket into slot “S” on the side of
dishwasher and bend tab in towards the side
of the dishwasher so that it keeps the bracket
in place.
17