HP WORKSTATION Z400 - Manual (Page 29)

SATA (Serial ATA)
Hard Drives for HP
Workstations 160,041,885,696
bytes
(10K) Capacity 160,041,885,696 bytes
Height 1 in; 2.5 cm
Width Media Diameter 3.5 in; 8.9 cm
Physical Size 4 in; 10.2 cm
Interface Serial ATA (1.5 Gb/s), Native Command Queuing
enabled
Synchronous
Transfer Rate
(Maximum) Up to 150 MB/s
Buffer 16 Mbytes
Seek Time (typical
reads, includes
controller overhead,
including settling) Single Track 0.3 ms
Average 4.6 ms
Full Stroke 10.2 ms
Rotational Speed 10,000 rpm
Logical Blocks 312,581,808
Operating
Temperature 41° to 131° F (5° to 55° C)
1,000,204,886,016
bytes
(7,200) Capacity 1,000,204,886,016 bytes
Height 1 in; 2.5 cm
Width Media Diameter 3.5 in; 8.9 cm
Physical Size 4 in; 10.2 cm
Interface Serial ATA (3.0 Gb/s), Native Command Queuing
enabled
Synchronous
Transfer Rate
(Maximum) Up to 300 MB/s
Buffer 32 MB
Seek Time (typical
reads, includes
controller overhead,
including settling) Single Track 2 ms
Average 11 ms
Full Stroke 21 ms
Rotational Speed 7,200 rpm
Logical Blocks 1,953,525,168
Operating
Temperature 41° to 131° F (5° to 55° C)
500,107,862,016
bytes
(7,200) Capacity 500,107,862,016 bytes
Height 1 in; 2.5 cm
Width Media Diameter 3.5 in; 8.9 cm
Physical Size 4 in; 10.2 cm
Interface Serial ATA (3.0 Gb/s), Native Command Queuing
enabled
Synchronous
Transfer Rate
(Maximum) 300 MB/s
Buffer 16 MB
QuickSpecs
HP Z400 Workstation
Technical Specifications - Hard Drives
DA - 13276 Worldwide QuickSpecs — Version 4 — 4.17.2009 Page 29