HP WORKSTATION Z400 - Manual (Page 14)

ENERGY STAR®
qualified (Config
Dependent) Yes
80 PLUS Compliant Yes, Bronze
FEMP Standby Power
Compliant 115V (Wake-
on LAN disabled) (<2W
in S5 - Power Off) Yes
Power consumption in
sleep mode (as defined
by ENERGY STAR) -
Suspend to RAM (S3) <5W
Built-in Self Test (BIST)
LED Yes
Surge Tolerant Full
Ranging Power Supply
(withstands power
surges up to 2000V) Yes
Hood Lock Header Yes
Hood Sensor Header Yes
ASF 2.0 (Alert Standard
Format) Yes
Z400 Required Power Supply Info
Power Supply 475 watt custom power supply - (Wide Ranging Active PFC)
Operating Voltage Range 90 - 269 VAC
Rated Voltage Range 100 - 240 VAC 118 VAC
Rated Line Frequency 50-60 Hz 400 Hz
Operating Line Frequency Range 47 - 66 Hz 393 - 407 Hz
Rated Input Current 10 A @ 110-127 VAC
6 A @ 200-240 VAC
10 A @118 VAC
Heat Dissipation (Configuration and software
dependent) Typical 954 btu/hr (240.3 kg-cal/hr)
Maximum 1977 btu/hr (498.2 kg-cal/hr)
Power Supply Fan 92x25 mm variable speed
Energy Star Compliant (config dependent) YES
80 PLUS® Compliant Yes, Bronze
FEMP Standby Power Compliant@115V (Wake-
on LAN disabled)(<2W in S5-Power Off) YES
EuP Compliant@230V (<1 W in S5-Power Off) YES
Power Consumption in sleep mode (as defined
by ENERGY STAR) - Suspend to RAM (S3)
(Instantly Available PC) measured at 115V. <6W
Built-in Selft Test LED YES
Surge Tolerant Full Ranging Power Supply
(withstands power surges up to 2000V YES
*Input Voltage Restrictions
QuickSpecs
HP Z400 Workstation
System Technical Specifications
DA - 13276 Worldwide QuickSpecs — Version 4 — 4.17.2009 Page 14