Quickspecs – HP ProLiant Server Blade BL460c User Manual
Page 17
Intel® Xeon® processor X5270 (3.50 GHz, 1333 FSB, 80W)
NOTE: If 2 processors are desired, select one 492309-L21 and one 492309-B21.
492309-L21
Intel® Xeon® processor X5260 (3.33 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 461623-L21 and one 461623-B21.
461623-L21
Intel® Xeon® processor L5240 (3.00 GHz, 1333 FSB, 40 W, LV) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 461624-L21 and one 461624-B21
461624-L21
Intel® Xeon® processor E5205 (1.86 GHz, 1333 FSB, 65 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 461625-L21and one 461625-B21.
461625-L21
Memory
1 GB FBD PC2-5300 (2 x 512 MB) Kit
397409-B21
2 GB FBD PC2-5300 (2 x 1 GB LP) Kit
461826-B21
2 GB FBD PC2-5300 (2 x 1 GB) Kit
397411-B21
4 GB FBD PC2-5300 (2 x 2 GB LP) Kit
461828-B21
4 GB FBD PC2-5300 (2 x 2 GB) Kit
397413-B21
8 GB FBD PC2-5300 (2 x 4 GB) Kit
397415-B21
8 GB FBD PC2-5300 (2 x 4 GB LP) Kit
466440-B21
16 GB FBD PC2-5300 (2 x 8 GB) Kit
413015-B21
64 GB FBD PC2-5300 (8 x 8 GB) Kit
495604-B21
NOTE: Memory Option Kits described as LP include Low Power DIMMs. For more
information on ProLiant Energy Efficient Features, see:
NOTE: Must be installed in pairs
NOTE: 64GB of memory is supported with 80W processors and below. 64GB of
memory is Not supported with 120W processors.
NOTE: Up to three 16 GB (2 x 8 GB) memory option kits or 48 GB of memory is
supported with 120W processors.
Step 3: Choose Additional Factory Integratable Options (one of the following from each list
unless otherwise noted):
Hard Drive Backplane HP ProLiant BL460c Hard Disk Drive Backplane, FIO
NOTE: Includes USB connector.
447711-B21
NOTE: The Hard Drive Backplane is required for all blades that support hard disk
drives or require the internal USB 2.0 connector for security key devices, licensing or
VMware ESX Server 3i.
Controller Cache
64 MB Cache - FIO Only
NOTE: Integrated HP Smart Array E200i RAID controller supporting RAID 0/1
Controller cache module selection is required for all blades that support hard disk
drives. Select either the standard 64 MB module above or the optional 128 MB
module below.
NOTE: This option is not required when configuring a Drive-less Model.
405102-B21
128 MB Battery-Backed Cache Enabler
NOTE: Supports the HP Smart Array E200i Controller.
NOTE: This option is not required when configuring a Drive-less Model.
351580-B21
QuickSpecs
HP ProLiant BL460c Server Blade
Configuration Information - Factory Integrated Models
DA - 12518 Worldwide QuickSpecs — Version 35 — 4.27.2009
Page 17