HP ProLiant Server Blade BL460c - Manual (Page 16)

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models HP ProLiant BL460c Driveless CTO Blade 447707-B21
Configurable Model ships with:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters plus one (1)
additional 10/100 NIC dedicated to iLO 2 Management
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
Processors For single processor configuration choose:
Quad-Core Processor Option Kits
Intel® Xeon® Processor X5470 (3.33 GHz, 1333 FSB, 120W)Option Kit, FIO
NOTE: If 2 processors are desired, select one 492308-L21 and one 492308-B21.
492308-L21
Intel® Xeon® processor X5460 (3.16 GHz, 1333 FSB, 120 W) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 459973-L21 and one 459973-B21.
459973-L21
Intel® Xeon® processor X5450 (3.00 GHz, 1333 FSB, 120 W) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 463056-L21 and one 463056-B21.
463056-L21
Intel® Xeon® processor E5450 (3.00 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459489-L21 and one 459489-B21.
459489-L21
Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459490-L21 and one 459490-B21.
459490-L21
Intel® Xeon® processor E5430 (2.66 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459491-L21 and one 459491-B21.
459491-L21
Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459492-L21 and one 459492-B21.
459492-L21
Intel® Xeon® Processor L5420 (2.50 GHz, 1333 FSB, 50 W, LV) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 462876-L21 and one 462876-B21.
462876-L21
Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459493-L21 and one 459493-B21.
459493-L21
Intel® Xeon® Processor L5410 (2.33 GHz, 1333 FSB, 50 W LV), Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 462877-L21 and one 462877-B21.
462877-L21
Intel® Xeon® processor E5405 (2.00 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459494-L21 and one 459494-B21.
459494-L21
Dual-Core Processor Option Kits
QuickSpecs
HP ProLiant BL460c Server Blade
Configuration Information - Factory Integrated Models
DA - 12518 Worldwide QuickSpecs — Version 35 — 4.27.2009 Page 16