HP SA3150 - Manual (Page 10)

4 Hewlett-Packard VPN Server Appliance SA3150 Regulatory Information
Electronic and Electrical
Specifications
VAC Electrical and Connector Specifications
The following table contains the VAC electrical and
connector specifications for the HP VPN Server Appliance
SA3150.
Feature Specifications
Power
requirements 100 – 240 VAC
2.0 – 1.0 amps, 125 watts (max), 50/60 Hz
CAUTION : When installing multiple units
in a rack, do not overload the power circuit
to the rack.
Connectors 1 power cord connector
1 or 2 twisted-pair (10BaseT, 100BaseTX,
RJ-45) Ethernet connectors
The front panel has one RS232 DB-9 male
connector for a serial cable to a terminal
(console)
The rear panel has one asynchronous
(Comm) module RS232 DB-9 male
connector for a modem with rates up to
115.2 Kbps
Lithium Battery Usage Statement
There is danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery, as recommended by the manufacturer. Discard
used batteries according to the manufacturer's
instructions.