HP QM2-101 - Manual (Page 29)

28
MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 55899 Rev 18210
www.msscllc.com
Sample Message Instructions
Follow the directions below to enter the above sample message.
NOTE: to save space in the manual single key strokes are shown. It will be necessary to press a single
key multiple times to arrive at the desired character.
1. From the main screen press the MSG key.
2. Select EDIT and press
↵.
3. Select the desired message number to modify and press
↵. A selection can be made using the ↑
and
↓ keys or by keying in the message number.
NOTE: The DISP key changes the message preview between a general preview to a detail view
showing the contents of the upper and lower lines of a 2 line message.
4. If there is any text in the current message window, use the DEL key to remove it.
5. Enter the message above using the following keys:
Then press the Key and use the arrow keys to select the font character and press
↵.
With the character selected press the MSG key.
Use the arrow keys to select UPP and press
↵.
Enter the upper line of the 2 line message using the following keys:
and press
↵.
Use the arrow keys to select LOW and press
↵.
Enter the lower line of the 2 line message using the following keys:
and press
↵.
Use the arrow keys to select SET and press
↵ to return to the main message editing screen.
2
L
2
L
6. Select Yes and press
↵ to save changes.