Honeywell CHRONOTERM IV T8624D - Manual (Page 9)

69-1074
9
T8624D CHRONOTHERM ® IV DELUXE ZONE MULTISTAGE THERMOSTAT
Table 5. Installer Self-Test Options.
NOTE: Press any key and the displayed numbers will change. Press Time ▼ ▼ to go to the previous test and Time ▲ ▲ to
go to the next test. The Run Program Key will not exit this test. Press Time ▲ ▲ or Time ▼ ▼ and then the Run
Program Key to exit.
Key to
Press
Test
Number Description
Heating Equipment Self-Test
Time ▲ 10 Enter heating equipment self-test.
▲ 11 Stage-one heat comes on. The system fan is also energized.
▲ 12 Stage-two heat comes on. Stage-one heat and system fan remain on.
▼ 11 Stage-two heat turns off.
▼ 10 Stage-one heat and system fan turn off.
Cooling Equipment Self-Test
Time ▲ 30 Change from heating to cooling equipment self-test.
▲ 31 Stage-one cool and system fan come on.
▲ 32 Stage-two cool comes on. Stage-one cool and system fan remain on.
▼ 31 Stage-two cool turns off.
▼ 30 Stage-one cool and system fan turn off.
Fan Equipment Self-Test
Time ▲ 40 Change from cooling to fan equipment self-test.
▲ 41 Fan comes on.
▼ 40 Fan turns off.
Key Operation Self-Test
Time ▲ 60 2 Change from fan to key operation self-test.