Honeywell CHRONOTERM IV T8624D - Manual (Page 8)

69-1074 8
T8624D CHRONOTHERM ® IV DELUXE ZONE MULTISTAGE THERMOSTAT
ᕣ
Press Time ▲ ▲ or Time ▼ ▼ until the current time is
displayed.
NOTE: Tapping the Set Current Day/Time will
advance the time in one hour increments.
NOTE: If the current time is Daylight Savings
Time, press Daylight Time until DST is
displayed.
M10314
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day
Time
Heat/Cool Settings
Daylight Time Copy
AM
Tue
Set Day/Time
M10315
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time
Daylight
Time
Copy
AM
DST
Tue
Set Day/Time
ᕤ
Press Run Program.
INSTALLER SELF-TEST
Use the Installer Self-Test to check the thermostat
operation. Refer to Table 4 for a list of the available self-
tests.
To start the self-test:
CAUTION
The minimum off time for compressors is bypassed
during the Installer Self-Test. Equipment damage
can occur if the compressor is cycled too quickly.
Press and hold the increase ▲ and decrease ▼ keys at
the same time until 10 appears. All segments of the
display will be displayed before the 10 appears. See
Fig. 11 and 12.
M10316
Time Set Program
System Fan
Run Program
Run
Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time Copy
Auto
System Fan
Wake
Room
AM
DST
Tue
Heat
Fig. 11. Display of all the segments of the LCD.
Aux Ht
Heat
Auto
System Fan
Off Auto
Wake
Mon
Wait
In
Room
Outdoor
%Humid
Auto
Sav
AM
PM
Hold for
Cool
Repl Batt
On
Recovery
DST
Cool
TueWedThuFriSatSun
LeaveReturnSleep
M10345
Set Program Set Day/Time Start Time Temporary Setting Enrg
Em Heat
Em Ht
Table 4. Tests Available In The Installer Self-Test.
Fig. 12. Display of test number.
Refer to Table 5 for the directions and results of the
specific tests.
NOTE: Press Time ▲ ▲ to advance the next test and
Time ▼ ▼ to go back to the previous test. Press
Run Program to exit the self-test from any test
number except 60 series tests.
M10257A TEST NUMBER
Test
Number Self-Test Description
10-19 Heating equipment can be turned on and
off
30-39 Cooling equipment can be turned on and
off
40-49 Fan equipment can be turned on and off
60 0 to
60 19 Keyboard keys test
70-79 Thermostat information including date
code and software versions are displayed