HP 815MFP - Manual (Page 77)

hp designjet 815mfp & scanner 4200 71
tell me about WIDEsystem
WIDEsystem is an application designed to monitor and control the
functionality of your scanner and contains the drivers required by
your system. Its main features are:
• View the scanner system’s status, called the Scanner Mode, by
exiting your scanner system and on the Active Desktop,
selecting the WIDEsystem scanner icon on the system tray.
Status messages include remaining warm-up time, interface
connection errors, and an indication that the scanner is ready
for scanning.
• View useful error messages that relate to the current Scanner
Mode.
• View the load status of the original (media) to be scanned.
Set up the scanner system’s timer to determine times for
automatic power-up and power-down each day of the week.
Optimum performance from your scanner is obtained when it
has warmed up for an hour (may vary according to your
working environment). Also, if you are printing from lists and
there are a large number of copies, you may want to leave
your system running in overnight or at weekends. When the
power off time is reached, the scanner is set to standby mode
(power light is red) and the WIDEsystem icon on your Active
Desktop is yellow.
If a scan is being done when power off time is reached,
automatic power off is delayed by 15 minutes. If the scanner is
manually started, 3 hours will have to pass before it goes into