Quickspecs, Hp integrity rx5670 server, Hp integrity rx5670 server configuration – HP rx5670 User Manual

Page 9

Ultra2 SCSI cards do not support boot or MC/Serviceguard.

Special Note on the Smart Arry 5302 and 5304 Smart Array RAID controller

Special Note on the Smart Arry 5302 and 5304 Smart Array RAID controller
The Smart Array controllers do not automatically rebuild the internal HDD array when a failed drive is replaced. HP expects to provide auto rebuild
capability in Q4 2003. Until that time, customers can deploy one of the following workarounds:
1. Reboot the server to begin the rebuild process after the failed drive is replaced.
2. Connect the second channel to the other side of the disk backplane and utilize the Hot Spare feature of the Smart Array (this will require an additional
HDD). See the Smart Array User Guide for more details on setting up the Hot Spare feature.
3. Existing HP Server rx5670 customers currently using the NetRAID 2M card with Windows may continue to use their existing controller for internal RAID.
The NetRAID 2M will automatically detect a failed drive when it is replaced and begins the rebuild process. This workaround is not available with Linux, as
the NetRAID 2M card is not supported in the Linux operating system.

Integrated Multi-function

Integrated Multi-function
Core I/O

Core I/O

The integrated multifunction I/O provides core I/O functionally and includes the management processor, which provides
remote management and high availability monitoring capabilities.

10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system installation
External LVD Ultra160 SCSI (160 MB/s) port (Ultra160 is backward compatible with LVD Ultra2 and with SE SCSI)-
Order the appropriate cable to connect to external peripherals, example: VH to HD cable
Two internal dual-channel Ultra160 SCSI controllers. One channel per internal disk pair and one channel for the
removable media bay.

Integrated Management

Integrated Management
Processor Functionality

Processor Functionality

Dedicated 10/100Base T LAN port for LAN console and embedded web console access
DB 25 serial port-multiplexed (using W cable) into three RS 232 ports: local ASCII console, remote/modem console,
and general purpose
Password protected console ports
Console mirroring between all local, modem, LAN, and web consoles
Remote power up and power down control
Configurable remote access control
Event notification to system console-Provides connectivity, information, and support for HP UX tools (such as STM
and EMS) to notify by email, pager and/or HP response centers.
Interface to system monitoring and diagnostic hardware via an internal IC bus
Secure Sockets Layer security on web console

Internal Disk Drives

The HP Integrity rx5670 supports up to four internal low profile or half height hot plug disk drives.
Two Ultra160 SCSI controllers provide each disk drive pair with an independent SCSI channel
Supported by MirrorDisk/UX across both disk drives and controllers
Supports Smart Array 5302 and 5304 Ultra160 SCSI RAID with Windows and Linux operating system. Order internal
Smart Array cables for the rx5670 (A9828A) to connect Smart Array card to internal drives
36 GB 15K, 73 GB 15K, and 146 GB 10K hot plug disks are supported

System Console

System Console
Configurations

Configurations

The HP Integrity rx5670's integrated Management Processor provides five methods for console connections.

SSL secured Web console accessible through the 10/100Base T management LAN
Standard telnet connections accessible through the 10/100Base T management LAN
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
VGA graphics console using the A6869A graphics card - supported on Windows, Linux, and HP UX

QuickSpecs

HP Integrity rx5670 Server

Configuration

DA - 11719 Worldwide — Version 6 — July 2, 2004

Page 9