Husqvarna 305 - Manual (Page 48)

48 - English
6. MENU FUNCTIONS
Time lock
This function entails that Automower ® cannot be
started after 30 days without first entering the correct
PIN code. When the 30 days has passed Automower
®
will continue to mow as normal, but the Enter PIN code
message appears when the cover is opened. Enter
your code again and press OK.
PIN request
This function means that the mower requests a PIN
code when the main switch is set to 1 and each time
the cover is opened. The correct PIN code must be
entered to use the mower.
If the wrong PIN code is entered 5 times in succession
the mower will be blocked for a period. The blockage
time is extended for every new incorrect attempt.
Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the mower has been lifted
up for any reason. A ticking noise indicates that the
PIN code must be entered to prevent triggering the
alarm. The alarm can be turned off at any time by
entering the correct PIN code.
New loop signal (3-3)
The loop signal is randomly selected to create a
unique link between the mower and the charging
station. In rare cases, there may be a need to
generate a new signal, for instance if two adjacent
installations have a very similar signal.
• Park the mower in the charging station.
• Select New loop signal in the menu and press
OK.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
IMPORTANT INFORMATION
We recommend using the High security level
at all times.
Change PIN code
Security levels
New loop signal