Quickspecs, Hp proliant dl740, Hp proliant dl740 standard features – HP ProLiant DL740 User Manual

Page 5

Industry Standard

Industry Standard
Compliance

Compliance

ACPI 1.0b Compliant
PCI-X and PCI 2.2 Compliant
PAE Support
PXE Support
Microsoft® Logo certifications

Intelligent Manageability

Intelligent Manageability Integrated Lights-Out (iLO) Standard Management

Virtual Text Remote Console
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege

Integrated Lights-Out (iLO) Advanced Pack (supports Advanced features such as Graphical Remote Console and Virtual
Floppy - available as a separate option)
Insight Manager 7
HP Systems Insight Manager
Remote Insight Lights-Out Edition ll (optional)
ROM-Based Setup Utility (RBSU)
Integrated Management Log (IML)
Server Health logging
Automatic Server Recovery-2 (ASR-2)
System Interconnect Status Indicators
Remote-Flash Redundant ROM
Hot Spare Boot (

NOTE:

NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will

automatically reboot and use the remaining good processor(s).

)

Power Down Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)

Availability

Hot Plug RAID Memory - delivering unsurpassed memory protection and server availability:

Uses industry standard ECC SDRAM DIMMs
Fully redundant architecture, with no more performance overhead than is currently experienced with ECC protection.
Same level of redundancy as achieved with memory mirroring, at only 25% of the additional memory expense when
compared to mirroring.
Customer can choose to run in non-RAID memory mode by populating only the first 4 memory cartridges.
Hot Add

Hot Add

Hot Add
Add a new bank of DIMMs while the server is running
OS/Application enabled
Hot Upgrade

Hot Upgrade

Hot Upgrade
Upgrade from a lower capacity DIMM to a higher capacity DIMM while the server is running
OS/Application enabled
Hot Replace

Hot Replace

Hot Replace
Replace a failed DIMM while the server is running
OS/Application transparent

Six 64bit/100MHz PCI-X Hot Plug slots with push button functionality
Dual Redundant Hot Plug Fans
Smart Array 53XX Controller (optional)
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)
Fault Tolerant Processor Power Modules
Redundant/adaptive load balancing NIC Support
Dual Redundant Hot Plug Power Supplies

QuickSpecs

HP ProLiant DL740

Standard Features

DA - 11585 Worldwide — Version 33 — July 16, 2004

Page 5