Code 39 start / stop characters, Code 39 check character, Code 39 – Hand Held Products 2D IMAGER 4800P User Manual

Page 60

6 - 6

4800p 2D Imager User’s Guide

Code 39

< Default All Code 39 Settings >

Code 39

Code 39 Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.

Default = Don’t

Transmit.

Code 39 Check Character

No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.

* On

Off

Transmit

* Don’t Transmit