Hand Held Products 2D IMAGER 4800P - Manual (Page 57)

4800p 2D Imager User’s Guide 6 - 3
Codabar
Codabar
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t Transmit.
Codabar Check Character
Codabar check characters are created using different “modulos.” You can
program the imager to read only Codabar bar codes with Modulo 16 check
characters.
Default = No Check Character.
No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate and Transmit, the imager will only
read Codabar bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
* On
Off
Transmit
* Don’t Transmit