Hand Held Products 2D IMAGER 4800P - Manual (Page 159)

4800p 2D Imager User’s Guide 12 - 1
12
Product Specifications
4800p Specifications
Parameter Specification
Dimensions (Typical):
Height 1.4 inches (3.5 cm)
Length 3.4 inches (8.5 cm)
Width 2.3 inches (5.9 cm)
Weight 3 ounces (85.1 g)
Illumination:
Scan LEDs
Aiming LEDs 626nm +30nm
526nm +30nm
Image
VGA, 640x480 (4X00); 752x480 (5X00). Binary, TIFF, or
JPEG output.
Skew Angle ±40 degrees
Pitch Angle ±40 degrees
Motion Tolerance 4 inches (10 cm) per second
Symbol Contrast Grade 1.0 (20% or greater)
Voltage Requirements 4.5 - 5.5 VDC at imager
Current Draw (Typical):
Input Inrush Scanning Idle Standby Power Off
5V 550mA 350mA 75mA 10mA 0.500 mA
Power Supply Noise
Rejection
Maximum 100mV peak to peak, 10 to 100 kHz
Temperature Ranges:
Operating +22 °F to +104°F (-30°C to +40°C)
Storage -40 °F to +158°F (-40°C to +70°C)
Humidity 0 to 95% non-condensing
Mechanical Drop
Operational after 50 drops from 6 feet
(1.8 m) to concrete
Vibration Withstands 5G peak from 22 to 300 Hz
ESD Tolerance 15 kV to any external surface