Various operation methods, Hold function, 1 hold – Hitachi WIRELESSIP TD61-2472A User Manual
Page 76: 2 hold release, Old function, Hold
User's Manual
3. Various operation methods
3.1. Hold function
This is used to put a call on hold. The hold tone is played on the terminal that you have put on hold.
3.1.1
Hold
During a call, you can put the other party on hold by pressing the Send key.
Example: Putting B on hold
While A and B are talking, if A presses the Send key, B is put on hold.
H i t a c h i C a b l e
7 3 / 8 4
At this time, the screens for A (the terminal that put the call on hold) and B (the terminal that was put on
hold) display as below and the hold tone is played on B (the terminal that was put on hold).
3.1.2
Hold release
During a hold, you can end the hold by pressing the Send key.
A
B
During call
Press the Send key.
Telephone number:
Telephone number:
putting the call on hold> put on hold> A B Holding Telephone number: 2310 Telephone number: 2314 ♪ ♪ 書式変更 : フォント : Times New Roman, 10 pt 書式変更 : フォント : Times New Roman, 10 pt