Hitachi WIRELESSIP TD61-2472A User Manual
Page 55

User's Manual
2
You can switch the ringtone/ mode/ LED for inside lines and outside lines.
To set the ringer for a call coming in on an outside line, either press the "1"
on the number pad or select "1. External 1", then press the
key.
To set the ringer for a call coming in on an inside line, either press the "3"
on the number pad or select "3. Internal 1", then press the
key.
There are four settings available, two each for inside and outside lines.
Example
Setting Ringer
Mode
LED
External 1
Bell 1
Bell
Blue
External 2
Bell 5
Vibration
Red
Internal 1
Bell 11
Bell + vibration
No
alert
Internal 2
Bell 13
Mute
Blue
* Depending on the device connected, this is not possible. In this case, only
"1. External 1" is enabled.
3
Displays configuration information. (Ringtone, Mode, LED)
There are four modes.
・
Bell (bell)
・
Vibration (vibration)
・
Bell + vibration (bell + vibration)
・
Silent (mute)
There are three LED colors.
・
RED
・
BLUE
・
(None)
H i t a c h i C a b l e
5 2 / 8 4