EnGenius Technologies ESR-9710 - Manual (Page 69)

ESR-9710 Wireless N Gigabit Router Version 1.0
69
6.4.2.3 Restore Settings to Default
ƒ Click on the Restore all Settings to Factory Defaults button. This option restores al
configuration settings back to the settings that were in effect at the time when the
device was shipped from the factory.
ƒ Once the dialog box appears, click on the OK button to confirm the action.
Note: The current settings will be lost.
ƒ Click on the OK button to continue. You will then see the Rebooting page.
ƒ Please wait while the system is rebooting.
Note: Do no un-plug the device during this process as this may cause permanent
damage.
6.4.2.4 System Reboot
ƒ Click on the Reboot the Device button to reboot the device using its current settings.
Once the dialog box appears, click on the OK button to confirm the action.
ƒ Once the dialog box appears, click on the OK button to confirm the action.
Note: The current settings will be lost.
ƒ Click on the OK button to continue. You will then see the Rebooting page.