Elation Professional 1400E - Manual (Page 30)

Design Wash 1400E™
©Elation Professional® 30 Design Wash 1400E™
No DMX Status – This function dictates how the fixture will function if it looses
DMX signal during normal operation. The default function is set to hold, in which
the fixture will lock into the last DMX signal it received and remain in that position
until it is turned off or begins receiving a new DMX signal. If the fixture is turned
on without any DMX signal, the fixture will automatically go in to sound-active
mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture
will remain at it’s last settings. “Auto Program” – Fixture will go into stand-alone
mode, running the built-in program. “Music Control” – The fixture will go into
sound-active mode.
Battery charger
With this function, the rechargeable battery in the Control Board can be charged.
Please note that continued recharging shortens the battery life substantially. This is
why we recommend charging the battery only when needed. Please set this option
to ON for charging the battery.
Pan Reverse - This function allows you to invert all pan movements. Use the Up
and Down buttons to turn this function On and Off. Press the Enter button to accept
the change or the Mode button to cancel and return to the main menu.
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On and Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu.
Fine resolution – This function changes the DMX channel operation from 8bit to
16bit.
Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚.
Feedback – This function turns the feedback correction on or off. This function is set
to on as default.