Elation Professional 1400E - Manual (Page 25)

Design Wash 1400E™
©Elation Professional® 25 Design Wash 1400E™
10 MENU FUNCTIONS:
10.1 Function Mode
10.1.1. DMX address setting
This function is used to set or adjust the fixture’s starting DMX address. Every device
controlled by DMX has to have a unique starting address. The addressing feature is
what allows DMX to function properly. The DMX address of a fixture is what allows it to
communicate with a controller properly. The DMX addressing also allows the fixture to
ignore any DMX information coming from the controller that is not meant specifically for
the fixture. Because each fixture is connected in a daisy-chain fashion it is imperative
to assign a proper and unique starting DMX address to each and every fixture. The
DMX address is non-destructive and will remain in the fixture’s memory even when the
power to the unit is switched off. Memory is backed-up and retain by an internal power
source that should last about five years. For proper DMX addressing see Section
10/Page 32 of this user manual.
10.1.2. Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display will
automatically readout the changing DMX values as they are received.
10.1.3. Slave setting
With this function, you can define the device as slave for operation in Master/Slave
mode.
10.1.4. Auto Program
This function allows the internal programs to run. The desired program is selected in the
“Select program” section of the control menu. You can set the number of steps under
“Edit program”. You can edit the individual scenes under “Edit scenes”. With this
function, you can run the individual scenes either automatically, i.e. with the adjusted
Step-Time.
10.1.5. Music control
With this function, you can run the internal program via sound.