Layer 3 switch features – Enterasys Networks VH-8G-L3 User Manual
Page 19
9
9033705-01
• 8K active MAC address entry table per device with automatic
learning and aging (10 to 9999 seconds).
• 512 KB packet buffer per device.
• Broadcast and Multicast storm filtering.
• Supports Port Mirroring.
• Supports Port Trunking – up to four trunk groups may be set
up. One trunk group can have from two to eight ports.
• 802.1D Spanning Tree support.
• 802.1Q Tagged VLAN support – up to 63 User-defined
VLANs per device (one VLAN is reserved for internal use).
GVRP – (GARP VLAN Registration Protocol, where GARP
represents a Generic Attribute Registration Protocol (GARP),
support for dynamic VLAN registration.
• 802.1p Priority support with 4 priority queues.
• IGMP Snooping support.
Layer 3 Switch Features
• Wire speed IP forwarding.
• Hardware-based Layer 3 IP switching.
• IP packet forwarding rate of 12 Mpps.
• 2K active IP address entry table per device.
• Supports RIP – (Routing Information Protocol) version I and
II.
• Supports IP version 4.
• IGMP version 1 and 2 support (RFC 1112 and RFC 2236).
IGMP can be globally enabled or disabled for all VLANs.