Enviro C-11089 - Manual (Page 33)

33
Secondary Installation
L
OG
S
ET AND
E
MBER
I
NSTALLATION
:
NOTE: The logs are fragile and should be handled gently.
Figure 70. Empty firebox.
Figure 71. First Stage Log Set Installation.
Figure 72. Second Stage Log Set Installation.
Figure 71: The back left log rests
behind the left ledge pointed out in
Figure 70. The front of the log rests at
the end of the burner. Ensure it is flush
against the left brick panel.
Figure 72: The back right log rests
on the back left log and behind the
right ledge pointed out in Figure 70.
Ensure it is flush against the left brick
panel and against the back wall.
The placement of the logs is not arbitrary.
If they are positioned incorrectly, the
flames can be “pinched” and will not
burn correctly. The burner and a few
of the logs come with locator pins and
ledges, which make alignment easier.
Using the pictures provided, carefully
set the logs in place (see Figures 70
through 80).
Figure 70: The empty firebox showing
the ledges for the back logs.