Enterasys Networks Enterasys Vertical Horizon VH-8G - Manual (Page 23)

9033639 Product Overview 9
Factory Defaults
Table 1-3 lists the default settings for switch configuration parameters.
Each parameter can be changed via the console menus or Telnet.
Table 1-3. Factory Default Settings
Parameter Default Value
Multicast Filtering
GMRP Disabled
IGMP Multicast Filtering Disabled
Port Configuration
Flow Control Disabled
Speed and Duplex Auto
Admin Enabled
Broadcast Storm Control Enabled - 500 pps
Port Priority
Default Ingress User Priority 0
Spanning Tree Algorithm
Active Aging Time 300
Bridge Priority 32768
Forward Delay 15
Hello Time 2
Max Age 20
Path Cost 4 - 1000Mbps ports
Port Priority 128
Spanning Tree Protocol Enabled
System Configuration
Management VLAN All
BootP Enable Disabled
Password
Screen Timeout 10 min
Send Authentication Fail Traps Enabled
SNMP Community Name public, private
Terminal Baud Rate Auto
User Names admin, guest
VH-8g.book Page 9 Friday, November 17, 2000 5:29 PM