Epson BT-0260 - Manual (Page 6)

GETTING TO KNOW YOUR BT-0260 PRINTER COMBO ADAPTER
BT-0260 printer combo adapter supports two interfaces which can
be used to connect with your printer.
1). IEEE-1284 - It is a 36-pin male connector on the front. Connect it to
your printer. If your printer hides its female connector inside its case,
then you have to open it.
2). USB - It is a USB type A connector. You need to connect one end of the
USB cable to BT-0260 printer combo adapter, then connect another
end to the printer.
Note : If your printer supports both interfaces, we recommend you to
choose just one to connect with BT-0260 printer combo adapter. If you
connect BT-0260 printer combo adapter to both of them, 1284 interface
will be the functioning one.
3). Apply power to BT-0260 adapter by using the 7.5V DC power adapter
accompanied, it is also the only way to RESET BT-0260.
4). Mode button is used by the advanced user to configure the printer
adapter for some special purposes, it is normally left unused. You also
can refer to the Utility Manual in CD for how to use it.
FUNCTION OF LEDS DURING PRINTING
POWER LED
ƒ Power LED turns on when POWER is applied to BT-0260 printer
combo adapter.
BLUETOOTH LED
ƒ Bluetooth LED is blinking when Bluetooth link is established but no
data is transmitted on the line.
ƒ Bluetooth LED is ON when PC is wirelessly sending data to printer
through BT-0260 printer combo adapter.
PRINTER LED
ƒ Printer LED is ON when there is a USB or parallel (IEEE-1284) printer
connected to the BT-0260 printer combo adapter.
ƒ Printer LED is OFF when no printer is connected.
ƒ Printer LED is blinking when PC is sending data to printer through
BT-0260 printer combo adapter.
3