Epson BT-0260 - Manual (Page 20)

MULTIPLE BT-0260 PRINTER COMBO ADAPTERS
Previous sections talk about how to do a printing job with a BT-0260
printer combo adapter. This section is talking about when multiple adapt-
ers are installed in your office, how to configure each adapter before
printing ? Supposed there are three BT-0260 printer combo adapters, two
of them are connected to two EPSON Stylus C61 printers and one is con-
nected to an EPSON Stylus Photo 830U printer separately.
In the following example, we assume :
BT-PRT-B0A351 is connecting to EPSON Stylus C61.
BT-PRT-B0A352 is connecting to EPSON Stylus C61.
BT-PRT-B0A353 is connecting to EPSON Stylus Photo 830U.
The configuration steps of each BT-0260 printer adapter are :
1. Connects BT-0260 adapter to printer through USB or parellel port.
2. Power on BT-0260 printer adapter.
3. Power on printer.
4. From PC side, click START -> Control Panel -> Wireless Link, and folow
the configuration steps as mentioned in previous sections to install the
driver.
17
EPSON Stylus C61 (Sales_Dept)
EPSON Stylus Photo 830U (Adm_Dept)
EPSON Stylus C61 (RD_Dept)