Progressive, Reducing image noise (dnr), Lamp setting – Eiki EIP-250 User Manual

Page 44: Picture adjustment (“picture” menu) (continued), 77 lamp setting, 66 reducing image noise (dnr)

5 Progressive

Note

• In NTSC or PAL60Hz, even if the 3D Progres-

sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.

• When the image is blurred or noisy, switch to

the optimal mode.

* The film source is a digital video recording with the

original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.

Selectable

items

2D
Progressive

3D
Progressive

Film Mode

Description

Useful to display fast-moving images
such as sports.

Useful to display relatively slow-
moving images such as drama and
documentary more clearly.

Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.

7 Lamp Setting

Note

• In the Eco + Quiet mode, the fan sound and

power consumption are lower than those in
the Bright mode. (Projection brightness de-
creases as shown in the chart.)

Selectable

items

Eco + Quiet

Bright

Brightness and Power consumption

EIP-2600

Approx. 70%

EIP-250

Approx. 80%

100%

Menu operation n Page

Picture Adjustment (“Picture” Menu)
(Continued)

6 Reducing Image Noise (DNR)

Note

Set “DNR” to “Off” in the following cases:
• When the image is blurry.
• When the contours and colors of moving im-

ages drag.

• When TV broadcasts with weak signals are

projected.

Selectable

items

Off

Level 1

Level 2

Description

The DNR function is not activated.

Sets the DNR level for viewing a
clearer picture.

Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.

• This function is available for 480

and 576

signals using COMPUTER/COMPONENT or
DVI (EIP-2600 only) input.

• This function is available for all signals with

S-VIDEO and VIDEO input.

Info