Meat probe – LG Studio 30 Inch Slide-In Gas Smart Range Owners Manual User Manual
Page 46
46
OPERATION
2
Turn the oven mode knob to select
Remote
Start
.
3
When
ON
appears in the display, the Remote
Start function is ready to use.
4
Follow the directions in the smart phone
application to set the cook mode,
temperature, and run time (preheating time
plus holding time).
NOTE
• Do not place food in the oven before or during
the Remote Start run time.
• Remote Start is disconnected in the following
situations:
- Remote Start is never set up in the
smartphone app.
- The Remote Start status is
OFF
or
door
.
- Remote Start experiences a problem during
operation.
- The Remote Start function cannot be started
when the oven door is open. A beep alerts you
to shut the door.
Meat Probe
The meat probe accurately measures the internal
temperature of meat, poultry and casseroles. It
should not be used during broiling, self clean,
warming, proofing, FrozenMeal or Air Sous-Vide.
Always unplug and remove the meat probe from
the oven when removing food. Before using, insert
the probe into the center of the thickest part of the
meat or into the inner thigh or breast of poultry,
away from fat or bones. Place food in the oven and
connect the meat probe to the jack. Keep the
probe as far away from heat sources as possible.
Setting the Meat Probe Function
(example for roast at 375 °F with probe
temp. 160 °F)
1
Insert the meat probe into the meat.
2
Connect the meat probe to the jack.
3
The meat probe icon flashes in the display if
the meat probe is properly connected.
Method
1
Select cook mode. Turn the oven mode knob
to select
Conv. Roast
.
2
Set the oven temperature: touch
3
,
7
and
5
until 375 °F appears in the display.
3
Press
Start
.
4
Set the probe temperature: touch
1
,
6
and
0
until 160 °F appears in the display.
5
Press
Start
.
NOTE
• The default probe temperature is 150 °F (65 °C),
but can be changed to any temperature between
80 °F (27 °C) and 210 °F (100 °C). The display
shows the changing probe temperature. When
the set probe temperature is reached, the oven
shuts off automatically.
Changing the Probe Temperature
1
Press
Temp
.
2
Set the oven temperature.
3
Press
Start
.
4
Set the probe temperature.
5
Press
Start
.
IMPORTANT NOTE
Turn the oven mode knob to the
OFF
position to
cancel the Meat Probe function at any time. To
UUGGwG[]GG{ SGhGY[SGYWYXGG[aXXGwt