Samsung 30 Inch Slide-in Gas Smart Range Owner Manual - Manual (Page 58)

58 English
Tr
ouble
shoo
ting
Troubleshooting
Code symbol Meaning Solution
Divider switch malfunction.
1. If the Divider is in the oven,
make sure it is pushed in all
the way.
2. If the Divider is not in the
oven, see if something is
pressing against the divider
switch in the back of the
oven.
3. If the Divider is all the
way in or there is nothing
pressing against the Divider
switch, Tap
OFF , and then
restart the oven. If the
problem persists, disconnect
all power to the oven range
for at least 30 seconds, and
then reconnect the power.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Information codes
Code symbol Meaning Solution
Oven sensor malfunction. 1. Tap OFF , and then restart
the oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power. The oven is overheating.
Check the Control PBA NTC Sensor
Temp probe malfunction.
Check the PBA NTC Sensor
Check the PBA NTC Sensor
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
NX60T8751SS_AA_DG68-01219A-00_EN.indd 58 3/26/2020 8:39:50 PM