Electrolux 76669 - Manual (Page 39)

Operating Instructions
39
Additional Rinse (RINSE+)
The washing machine is set for very economical water consumption.
However, for persons who suffer from allergies to detergents, it can be
helpful to rinse with extra water.
3 If RINSE + is set, an additional rinse cycle is carried out with the COT-
TONS/LINEN, EASY CARES/EASY IRON and DELICATES programmes.
When the appliance is supplied from the factory, the additional rinse
function is not set.
Setting the additional rinse function:
0 1. Turn the programme
selector to SHORT SPIN.
2. Press the SOAKING button for at least 5 seconds.
After the button has been pressed for 5 seconds, RINSE
+
flashes on
the programme progress display for 5 seconds.
3. Release the SOAKING button while RINSE
+
flashes.
After it has stopped flashing, the additional rinse cycle has been set. It
remains set until it is manually cancelled.
When the additional rinse cycle is set, the indicator RINSE
+
lights up
on the programme progress display before the programme start and
during the additional rinse cycle.
4. If you wish to check whether the additional rinse function is enabled:
– Turn the programme selector to SHORT SPIN.
– Press the SOAKING button briefly.
If RINSE
+
flashes on the programme progress display, the additional
rinse cycle is set.
Cancelling the additional rinse function:
0 1. Turn the programme selector to SHORT SPIN.
2. Press the SOAKING button for at least 5 seconds.
RINSE
+
flashes on the programme progress display as soon as the but-
ton is pressed. After 5 seconds, RINSE
+
stops flashing and lights up
constantly for a further 5 seconds.
3. Release the SOAKING button while RINSE
+
lights up constantly.
After RINSE
+
has stopped lighting up, the additional rinse cycle is can-
celled.
3 An additional rinse cycle increases water consumption and the pro-
gramme duration.