Electrolux 76669 - Manual (Page 20)

Operating Instructions
20
Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Continue pressing the spin speed/RINSE HOLD but-
ton until the indicator for the desired spin speed is
illuminated.
3 If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/RINSE HOLD button until the RINSE
HOLD indicator is illuminated.
3 If RINSE HOLD is selected, the washing will remain in the final rinse wa-
ter and will not be spun.
Setting the delay timer/soaking time
Delay timer
The DELAY TIMER button allows you to delay the start of a wash
programme by 1 to a maximum of 19 hours.
0 To do this, continue pressing the DELAY
TIMER button until the desired start delay
is displayed in the multi-display, like 12h
for a delay of the start of the programme
by 12 hours.
If 19h is shown and you press the button
once again, the duration of the wash programme set will be shown
(display in minutes, e. g.120). In this situation no time delay has been
set.
– COTTONS/LINEN 1600 revolutions per minute
– EASY-CARES/EASY IRON 1200 revolutions per minute
– DELICATES 1200 revolutions per minute
– WOOL/SILK/
P (hand wash)
1200 revolutions per minute