Electrolux 76669 - Manual (Page 26)

Operating Instructions
26
If the EASY IRON programme has been selected:
For EASY IRON, following the end of the programme an anti-crease
phase of approx. 30 minutes is performed. During this time the multi-
display shows the time remaining (e.g. 1 minute) and the END display
will illuminate.
You can remove the washing at any time during the anti-crease phase.
0 1. To do this, press the START/PAUSE button
The door can now be opened and the washing removed.
2. Then turn the programme selector to OFF.
The wash programme has ended.
3 If the OVERDOSING indicator illuminates, then too
much detergent was used in the washing programme
just completed. Observe the dosing recommendations
of the detergent manufacturer as well as the load quantity for the next
wash.
Important! If the washing machine is not to be used for a long period:
Close the water tap and disconnect the washing machine from the
electricity mains.