Epson 750 - Manual (Page 24)

22 Setting Up Your Printer
Seychelles
short.bk
Rev. C
A5 size SETUP.FM
2/5/99 Pass 2
L Proof Sign-off:
K. Nishi
_______
N.Nomoto _______
K.Norum _______
5. If you want to install all of the printer software included on
your printer software CD-ROM, make sure the Install
Location box shows the correct disk drive and click Install.
If you are low on disk space, select Custom Install from the
pop-up menu and click Serial Driver Package. Confirm the
destination for installation, then click Install.
Note:
Click the
icon to get information on each component.
6. When a message appears informing you that installation is
finished, click Restart to complete the installation and restart
your computer.
Selecting Your Printer in the Chooser
After you install the printer software, you need to open the
Chooser to select your printer. You have to choose the printer the
first time you use it or whenever you want to switch to another
printer. Your Macintosh will always print using the last printer
selected.
Note:
If you are using a Macintosh Quadra 950 or 900, you need to choose
Compatible in the Serial Switch dialog box before selecting your
printer from the Chooser. To open the Serial Switch dialog box, choose
Control Panel from the Apple menu, then choose Serial Switch.
1. Make sure the printer is connected to your Macintosh and is
turned on.