Ericsson A1228di - Manual (Page 6)

Not
for
commercial
use
– Ericsson
Inc.
*HWWLQJ 6WDUWHG
&RQQHFWLQJ DQG 5HPRYLQJ
Note! You can find your phone’s model number by removing the battery
and looking on the back of the phone.
1 Place the battery over the back of the phone.
The label on the battery should face down.
Insert the top portion of the battery into the
phone. The tab on the bottom of the battery
should be pointing toward the bottom of the
phone.
2 Press down until you hear a click. The battery is
now connected.
3 Remove the battery by pushing in on the tab of
the battery with your thumb.
4 Then, lift the battery up and out of the battery
cavity.
&KDUJLQJ
Your phone was packaged with either a rapid
or travel charger. It is important that you fully
charge your battery before you use your phone.
Both chargers supply power to charge your
battery while the battery is attached to your
phone. If your phone is On, it can receive calls
while using either charger.
Note! Never attach the charger to a phone that
does not have a battery installed.
1 If you have a rapid charger, plug the charger
into a standard wall electrical outlet. If you
have a travel charger, connect the appropriate AC power cord and
phone charging cord to the travel charger.
2 Hold the phone with the display and keypad facing up.
*HWWLQJ 6WDUWHG
'LWWR /LQGDERRN 3DJH 7XHVGD\ 2FWREHU 30