Ericsson A1228di - Manual (Page 12)

Not
for
commercial
use
– Ericsson
Inc.
%DVLF 2SHUDWLRQV
6XPPDU\ RI %DVLF 2SHUDWLRQV 7XUQLQJ
Turn your phone Off by pressing and holding 12 until your phone
sounds a beep and turns off. Turn your phone On by pressing and
holding
12 until your phone sounds a beep and turns on.
0DNLQJ &DOOV
1 Enter the phone number you want to call by pressing the numeric
keys. The number is shown in the display.
Note! You can press &/5 to erase one or more digits in the display, or
press and hold &/5 to erase all digits.
2 Press <(6 . Calling is shown in the display while your phone
accesses the wireless network.
3 When the call is connected, Ongoing Call will display on your
screen. The phone number that you dialed will be replaced by the
call timer.
4 When you finish your conversation, press 12 .
%DVLF 2SHUDWLRQV
Turn your phone On or Off Press and hold 12
Answer a call <(6
End a call 12
Increase/decrease ear volume during a call Either side key
Access the main menu 0(18
Go back one level in menu mode 12
Exit menu mode from any menu level &/5
Scroll through menus or menu settings or
Erase the last digit or letter entered &/5
Erase all digits or letters entered Press and hold &/5
Call the number shown in the display <(6
Recall a last dialed number <(6 or
Save the text message you are reading <(6
Select a highlighted menu setting <(6
Turn Keypad Lock On or Off 0(18 then *
Turn Phone Silent On or Off 0(18 then #
Call number in display using calling card Press and hold <(6
Mute your voice during a call Press and hold &/5
Mute the ringer when a call is received 12 or either side key
Check voice mail Press and hold
'LWWR /LQGDERRN 3DJH 7XHVGD\ 2FWREHU 30