Emulex Printer Server - Manual (Page 37)

Command Reference Guide 31
Change Authorized Groups
Specify which group codes (groups of LAT-compatible services) are
accessible to a port. The default is no groups authorized for port.
>
Server>> [set |define |change] port port_num
authorized groups group_list [enabled |disabled]
port_num Enter number of the port that will be given
access to the group.
group_list Enter the group or list of groups that will be
assigned to the port.
enabled Enables specified groups access to a port.
disabled Disables specified groups access to a port.
NetWare Commands
Define Password
Define a password for the PSERVER emulation to use to login to the
NetWare file server.
>
Server>> define server netware password
“password”
“password” Enter a maximum of 8 characters and enclose
them in quotes. The default is no password. To
clear, enter “” in its place.
Define NetWare Node
Define NetWare nodes as Remote Printer or Preferred File Server.
>
Server>> define node node_name [nfserver
|npserver]
node_name The name of the node to be affected.
nfserver Defines the node as the Novell Preferred File
Server. Only one nfserver node may be defined.
npserver Defines the node to act as a Novell Remote
Printer. More than one npserver node may be
defined.