Emulex Printer Server - Manual (Page 21)

Command Reference Guide 15
>
Server>> [set |define |change] node node_name
ip ip_address [tcpip] [gateway [default]]
[syslog facility]
node_name Enter either the TCP/IP full node name or the IP
address of the node. See naming conventions
in beginning of this section.
ip_address The IP address of the designated node in
decimal dot notation. For example,
123.234.345.490
tcpip Establishes the node as a TCP/IP node in the
server’s internal node table.
gateway Establishes the node as a TCP/IP gateway,
which allows communication between segments
on a network.
default If entered along with the gateway option, defines
the TCP/IP gateway to be the first gateway seen
after the routing table is checked.
syslog Establishes the node as a TCP/IP syslog node,
which is designated to receive events or errors.
facility Entered with syslog, this option defines what
type of facility reporting is done (LPR, local0 to
local7). Default is LPR.
IMPORTANT: Since only 10 entries are allowed in
the permanent table, a Set command
may succeed when Define or Change
generates a node table full error.