Emulex Printer Server - Manual (Page 12)

6 Command Reference Guide
Command Summary
In the summary below, all commands are presented alphabetically. If the
keywords are either set, define or change, only change is listed. Page
numbers are provided as a quick directory to find an explanation of the
command.
arp [ -a ] [ -b ] [ -d ] [ -f ] [ -l ] [ -s ] [ -t ] 10
change node node_nam ip ip_address [tcpip] [gateway
[default]] [syslog facility]
14
change port port_num [input |output] speed baud_rate 20
change port port_num access [dynamic |local |remote
|virtual |slprt |none]
18
change port port_num authorized groups group_list
[enabled |disabled]
31
change port port_num fonts add “font_list” 28
change port port_num fonts remove “font_list” [all] 28
change port port_num mapcrlf [enabled |disabled] 19
change port port_num type [ansi |hardcopy |softcopy] 19
change server console port_num 23
change server domain domain_name 26
change server dump [enabled |disabled] 42
change server groups group_list [enabled |disabled] 30
change server login password “pass_txt” 13
change server maintenance password “pass_txt” 13
change server name prntsvr_name 21
change server netware context “con_txt” 35
change server netware fast printserver [enabled
|disabled]
34
change server options option_list [enabled |disabled] 24
change server rarp n m [ temp ] 39
change server route IP dest_ip gateway gwy_name gwy_ip 36
change server snmp com_name access acc_right [trap IP 25