Emulex Printer Server User Manual
Page 13
Command Reference Guide 7
ip_addr
]
[set] [enabled |disabled]
change service “servc_name”
[port
port_num
]
[TCPport_num]
[
password
“pass_txt”
] [
protocol
]
[
enabled
|
disabled
]
crash 300
define node node_name [nfserver |npserver]
define port port_num appletalk backspoof [enabled
|disabled]
define port port_num appletalk tbcp [enabled
|disabled]
define server authorize protocol [all |none
|specific
]
[enabled |disabled]
define server bootp
n m
[temp]
define server dhcp n m
[temp]
define server gateway
[load_dump] ip [ip_address
|
none]
define server load [selfload |TFTP [put] |decnet]
define
server netware [default |802.2 |snap |802.3
|ethernet_II ether_type]
34
define server netware forms [enabled |disabled]
define server netware nds “tree_name”
define server netware password “pass_txt”
define server netware pserver [auto |disabled |3.x
|4.x]
define server netware rediscover minutes
define server netware required [enabled |disabled]
define server netware rprinter [enabled |disabled]
define server preferred dump ip ip_address
define server preferred load ip ip_address
define server software file_name
define service “servc_name” appletalk type “prn_type”
delete node node_name [all |ip ip_address |tcpip
|gateway |nfserver |npserver |syslog]
delete service “servc_name”