Exmark Metro - Manual (Page 12)

- 7 -
2. SPECIFICATIONS
2.1 MODEL NUMBER:
Serial Nos. 220,000 & Higher
M3211B; M3213KA; M3613KA; M3613KC; M3615KA; M4815KC; M4815KA; M4817KA
2.2 ENGINE
2.2.1 Engine Specifications: See your engine owner's manual.
2.2.2 RPM (No Load): 3600 rpm
2.3 FUEL SYSTEM
2.3.1 Capacity: 5 gal. (18.9 liter)
2.3.2 Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the
pump sticker octane rating of 87 or higher. In countries using the research method,
it should be 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut Off Valve: in-line, 1/4 turn
2.4 SAFETY INTERLOCK SYSTEM
Operator must have the transmission in neutral and blades disengaged to start engine.
Release of Operator Presence Control (OPC) levers will cause engine to stop if
transmission is not in neutral and/or blade drive is engaged.
2.5 STEERING/BRAKE CONTROL
Fingertip drive control levers provide independent control of traction, braking and neutral to
each drive wheel for moving, stopping & power turning. Parking brakes are engaged by
locking drive control levers in the “brake” position.
2.6 TRANSMISSION
2.6.1 Peerless 700-061, five speeds forward and one reverse.
PART NO. 303518
LOCATION: Transmission Shifter Plate
PART NO. 323427
LOCATION: 32” & 36” Decks
PART NO. 303508
LOCATION: Right Rear Corner
of Deck
PART NO. 403170
LOCATION: 48” Decks