Elation Professional 575B - Manual (Page 31)

Design Spot 575B™
©Elation Professional, Los Angeles CA. 31 Design Spot 575B™
be entered each time the calibration menu function is entered.
9.7 USER MODE:
9.7.1 User mode – This function allows the user to create user defined channel orders
allowing the fixture to match the channel order of other fixtures on the market for
easier operation. A total of three user modes may be configured: User Mode A, User
Mode B, and User Mode C.
9.7.2 Edit User mode – This function allows the user to make the actual changes in the
user-defined modes that are accessed through the previous function.
9.8 EDIT PROGRAM:
9.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode” under
“Program Run.”
9.8.2 Edit program – This function allows the user to edit the built-in programs.
9.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
9.8.4 Rec Controller - The Design Spot 575B features an integrated DMX recorder by
pre-programmed scenes can be transmitted to the fixture via any standard DMX
controller. This function allows those scenes to be stored in to the fixture’s built-in
memory and then subsequently used to create user-defined programs.