Elation Professional 575B - Manual (Page 30)

Design Spot 575B™
©Elation Professional, Los Angeles CA. 30 Design Spot 575B™
scenes will be lost.
9.5 Reset Functions:
9.5.1 Reset All: This function will reset all internal motors to the home position.
9.5.2 Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
9.5.3 Reset Colors: This function will only reset the color wheel and the CMY filter motors
to the home position.
9.5.4 Reset Gobos: This function will only reset the gobo wheels to the home position.
9.5.5 Reset Shutter: This function will only reset the blackout shutter to the home
position.
9.5.6 Reset Others: This function will reset all other motors to the home position.
9.6 EFFECT ADJUST:
9.6.1 Test Channel – This menu function allows the user to select each individual fixture
channel and test it’s function independently from the control board.
9.6.2 Lamp adjustment (manual control) – This function readies the fixture for lamp
optimization in a simple single step procedure. This function will center the pan and
tilt motors while at the same time open the shutter and bring the dimmer to 100%. The
pan and tilt function will still operate if the fixture needs to be positioned to a flat clear
surface.
9.6.3 Calibrate values – This function should only be used by a qualified technician. This
function allows a user to make small adjustments to the effect wheels (color, gobo,
shutter, etc) to compensate for ware or in the event a sensor has been knocked
slightly out of place. Because improper use of this function can result in undesired
operation this function has been password protected. The password is 050 and must