Extron electronic MDA 2V EQ - Manual (Page 12)

VersaTools® MDA EQ Series • Installation and Operation
Installation and Operation, cont’d
MDA EQ Series
A
Appendix A
Specifications, Part Numbers,
and Accessories
Specifications
Models
Included Parts
Optional Accessories
2-10
1 Power indicator LED — This LED, when lit, indicates that the
MDA EQ is receiving power.
2 Gain and Equalization potentiometers — (One set for each
output for MDA 2V and 4V EQ; one set for each pair of outputs
for MDA 4SV EQ) Use an Extron Tweeker (a small screwdriver)
to rotate these pots to adjust for gain and equalization when
devices with long cables are connected.
3 Gain and Equalization potentiometers (luma ) — (MDA SV4
EQ only; one set for each pair of outputs) Use an Extron
Tweeker to rotate these pots to adjust the luminance gain and
equalization for devices connected with long cables.
4 Gain potentiometer (chroma) — (MDA SV4 EQ only; one for
each pair of outputs) Use an Extron Tweeker to rotate this pot to
adjust the chroma gain.