Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 189)

o Video Mode
Configure the video processing method to match the type of video
content.
Auto
(Default):
Process video automatically based on
the HDMI content information.
Game:
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Movie:
Perform image processing that is suitable
for contents other than games.
Bypass:
Remove all video processing from the
HDMI video path.
0
If “Video Mode” is set to “Auto”, the mode is switched according to the input
contents.
0
Information displays such as the volume bar cannot be overlaid with the video
signal when “Video Mode” is set to “Bypass”.
0
This item can be set when “HDMI” is assigned for each input source.
0 This cannot be set when sound mode is set to “IMAX DTS” or “IMAX DTS:X”.
o HDMI Upscaler
Sets the mode for upscaling 1080p and 4K HDMI content to 8K.
Auto:
Upscale 1080p and 4K HDMI video to 8K
based on the monitor’s capabilities.
Off
(Default):
8K upscaler is disabled.
0
This item can be set when “HDMI” is assigned for each input source.
0
This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color, computer resolutions,
compressed video or HDR.
0 This cannot be set when sound mode is set to “IMAX DTS” or “IMAX DTS:X”.
0
This item can be set when “Video Mode” is set to anything other than
“Bypass”. ( v p. 189)
Contents Connections Playback Settings Tips Appendix
189
Front panel Display Rear panel Remote Index