Emerson Radio ES20 User Manual

Page 23

5.) Close the CD door. The disc will spin and zeros will flash in the track number

and time display. Within a few seconds the disc will stop spinning and the

display will show the total playing time and total tracks on the disc.

Note: If the disc is inserted upside down or if the disc is badly scratched

and unreadable, playback will

not be possible. In this case the

main display will show “no

dISC”. Remove the disc and re

insert it properly, or try another

disc.

6.) Press the PLAY/PAUSE

button on the front panel of the main unit or on the

remote control to begin playback

on track 1. The display will show

the elapsed playing time of each

track as it plays.

7.) Adjust the MAIN VOLUME and VARIABLE BASS VOLUME level controls as

desired.

8.) When the last track has played the player stops automatically and the display

again shows the total playing time

and tracks on the disc. You may

also stop playback at any time by

pressing the STOP

/BAND

button on the front panel of the

main unit or on the remote control.

9.) When you are finished listening press on the front edge of the CD door to

open it. Remove your disc and close the CD door.

10.)Press the STANDBY/ON button to return the system to the STANDBY (Power

Off) mode.

ES20_ib061303.p65

13/6/2003, 12:13