Emerson Radio ES20 - Manual (Page 14)

13
OPERATING INSTRUCTIONS
• Make sure the Tuner/CD Player unit is connected to the Amplifier/
Subwoofer unit with the built in ribbon cable.
• Make sure that the 2 “Thinovation™ ” Flat Panel speakers are connected
to the Amplifier/Subwoofer unit.
• Make sure that the Main Power switch on the back of the Amplifier/
Subwoofer unit is ‘On’.
• Make sure that you have installed the batteries in the remote control,
and the back up batteries in the Tuner/CD Player battery compartment.
• Make sure the AC power cord from the Amplifier/Subwoofer unit is
properly connected to a 120V 60Hz household AC power outlet.
USING THE CONTROLS
Most of the functions of this system can be operated by pressing the buttons on
the front panel, or the corresponding buttons on the remote control handset. If a
particular function can only be operated by controls on the main unit or controls on
the remote, the instructions will specify:
“MAIN UNIT ONLY” or “REMOTE CONTROL ONLY”
ES20_ib061303.p65 13/6/2003, 12:13 13