Emerson Radio ES20 - Manual (Page 20)

19
PRE-SETTING STATIONS IN THE TUNER MEMORY
This system includes a 20 station preset memory. You can store up to 10 FM
stations and 10 AM stations in the tuner memory for immediate recall. The procedure
for storing stations in memory is as follows:
1.) Follow step 3 under “LISTENING TO THE RADIO” above to select the first
station you wish to memorize.
Example: FM 103.5 MHz.
2.) W h e n t h e d e s i r e d s t a t i o n
appears on the display press the
MEMORY/TIME ADJ. button on
the front panel or the remote
control. The MEMORY indicator
flashes and Preset Memory
Number 01 appears in the display.
3.) Press the MEMORY/TIME ADJ.
button once more to enter your
station in preset memory number
01.
4.) Tune to the next station you wish to memorize. When the desired station
appears on the display press the MEMORY/TIME ADJ. button to start the
MEMORY indicator flashing, and then press the REPEAT/PRESET button to
select a different preset memory number.
(Each time you press the REPEAT/PRESET button the preset memory number
display advances by 1.)
5.) Press the MEMORY/TIME ADJ. button again to enter the station in the selected
preset memory number
6.) Repeat steps 4 and 5 until you have memorized up to 10 stations on the FM
band, the press the STOP/BAND button to switch to the AM band and follow
the same procedure to enter up to 10 stations on the AM band.
ES20_ib061303.p65 13/6/2003, 12:13 19