Enterasys Networks VH-2402S - Manual (Page 16)

2 Product Overview VH-2402S
to configure and control functions in the stack. The module also supports
Remote Monitoring (RMON) for Statistics, History, Alarm and Event
groups (Groups 1-3, 9).
Network management can be performed in-band using TCP/IP or Telnet
connection to the serial console port on the Management Module. This
module also includes a built-in Web agent that provides management
access via common http browsers such as Netscape Navigator and
Microsoft’s Internet Explorer. In addition, the console port allows out-of-
band management using a PC, terminal, or modem connection.
The VH-2402S switch is desktop or rack-mountable. LEDs on the front
panel provide information about the operating status of the switch. The
back panel contains the power connector, redundant power connector,
and three slots for the optional modules. The side panel includes two fans
that maintain ventilation and cooling for internal switch components.
Features
• Ports:
- 24 dual-speed 10Base-T/100Base-TX ports using RJ-45
connectors (MDI-X)
- 3 slots for optional modules
- 1 redundant power unit socket
• Optional Media Modules:
- VH1000-S1SX: 1000Base-SX Module provides 1 SC multi-
mode fiber optic port for an uplink connection to the stack
- VH1000-S1LX: 1000Base-LX Module provides 1 SC single-
mode fiber optic port for an uplink connection to the stack
- VH100-S2MFX: 100Base-FX Module provides 2 SC multi-
mode fiber optic ports for an uplink connection to the stack
- VH100-S1SFX: 100Base-FX Module provides 1 SC single-
mode fiber optic port for an uplink connection to the stack
• Optional Stacking Module:
- VH-STACK: Stacking Module provides 2 SCSI II connectors
for stacking switches (includes one 32 cm stack
interconnection cable)
• Optional Stacking Cable:
- 9380142: 32 cm stack interconnection cable
• Optional RMON/SNMP/Web Management Module:
- VH-SMGMT: Management Module provides SNMP, RMON,
and Web management support for the stack.