beautypg.com

Electrolux EKC607601 User Manual

Page 9

background image

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
graphic), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function:
1. Touch

.

comes on in the display.

2. Touch again and again until

comes on in the display.

3. Immediately touch

again and again

until the necessary heat setting comes
on. After 3 seconds

comes on in the

display.

To stop the function touch

.

POWER MANAGEMENT
Operating both ovens and the four hob
zones at the same time can activate the
power management system, which will de-
activate one or more of the hob heating
zones. This is a power regulation within the
appliance to prevent a circuit overload

USING THE TIMER
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
Selection of the cooking zone:touch

again and again until the indicator of a

necessary cooking zone comes on.

Starting and changing the timer:

touch

or

of the cooking zone to set

the time (

00

-

99

minutes). When the

indicator of the cooking zone flashes
slower, the time counts down.

Stopping the timer: select the cooking

zone with

and touch

to switch off

the timer. The remaining time counts
backwards to

00

. The indicator of the

cooking zone goes out. You can also
touch

and

at the same time to

switch off the timer.

Checking the remaining time: select

the cooking zone with

. The indicator

of the cooking zone flashes faster. Dis-
play shows the remaining time.

When the time elapses, the sound operates
and

00

flashes. The cooking zone switches

off.
Stopping the sound: touch .
You can use the timer as a minute minder
while cooking zones do not operate. Touch

. Touch

or

to select the time.

When the time elapses, the sound operates
and

00

flashes

STARTING THE STOP+GO

The

function sets all cooking zones that

operate to a keep warm setting.
Touch

to start this function. The

symbol

comes on.

Touch

to stop this function. The heat

setting that you set before comes on.

does not stop the timer function.
locks the control bars.

LOCKING / UNLOCKING THE
CONTROL PANEL
You can lock the control panel, but not

.

It prevents an accidental change of the heat
setting during a cooking session.
First set the heat setting.
Touch the symbol

. The symbol

comes on for 4 seconds.
The Timer still operates.
Touch the symbol

to switch off this func-

tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.

The locking / unlocking function locks
or unlocks the oven interface at the
same time.

THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the hob and oven.

Starting the child safety device
• Start the hob with

. Do not set the

heat settings.

• Touch

for 4 seconds. Acoustic signal

appears. The symbol

comes on the

hob and the symbol "SAFE"on the oven
display.

• Stop the hob with .

electrolux 9