Electrolux EKC607601 - Manual (Page 7)

SENSOR FIELD
Touch and hold for minimum 1 second
the sensor field on the control panel to
operate the appliance.
1s
SETTING THE TIME
The oven only operates after time set.
When you connect the appliance to the
electrical supply or in case of a power cut,
the Time function indicator flashes automat-
ically.
To set the current time use
or button.
After approximately 5 seconds, the flashing
stops and the display shows the time of
day set.
You can only change the Time of
day
if :
• the switch-on lock is not on
• none of the clock functions Duration
or End is set
• no oven function is set.
PRE-HEATING
1. Set function
and maximum temper-
ature.
2. Let the appliance operate without the
food for approximately 1 hour.
3. Set function and maximum temper-
ature.
4. Let the appliance operate without the
food for approximately 10 minutes.
5. Set function and maximum temper-
ature.
6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
Preheat the two ovens. Heat up one oven
at a time.
HOB - DAILY USE
Warning! Refer to the Safety chapters.
CONTROL PANEL LAYOUT
9 10
1
8 7
2 3 5 4 6
electrolux 7